Which lubricant for your Liebherr R944C Litronic (1000/1079) Liebherr D936L IIIA/T3 (16469 - 22914) ( - )?
Choosing the best Yacco lubricant for the maintenance of your Liebherr R944C Litronic (1000/1079) Liebherr D936L IIIA/T3 (16469 - 22914) ? Yacco gives you a complete professional advice on selecting your motor oil, gearbox oil (transaxle), power steering and brake fluids, coolants.
Engine Liebherr D936L
Use : Normal, fuel sulfur level <0,5 %, ambient temperature < -10°C
Intervals :
- Check 10 hours
- Change 12 months/ 250 hours
Use : Alternative, fuel sulfur level <0,5 %, ambient temperature < -10°C
Intervals :
- Check 10 hours
- Change 125 hours/ 12 months
Use : Alternative, fuel sulfur level <0,5 %, ambient temperature > -10°C
Intervals :
- Check 10 hours
- Change 12 months/ 250 hours
Use : Normal, fuel sulfur level <0,5 %, ambient temperature > -10°C
Intervals :
- Check 10 hours
- Change 500 hours/ 12 months
Hydraulic system
Capacities
- Capacity 710 litre (Hydraulic system including tank)
- Capacity 460 litre (Hydraulic tank)
- Capacity 625 litre (Change capacity)
Use : Normal
Intervals :
- Check 10 hours
- Change 2000 hours
Splitter gearbox
Use : Normal
Intervals :
- Check 50 hours
- Change 500 hours
Cooling system
Use : Normal
Intervals :
- Check 10 hours
- Change 24 months/ 3000 hours
Swing gear, only used as a parking brake
Use : Normal
Intervals :
- Check 500 hours
- Change 1000 hours
Use : Initial service
Intervals :
Swing reduction unit, with positioning swing brake
Use : Normal
Intervals :
- Check 500 hours
- Change 1000 hours
Use : Initial service
Intervals :
Travel gear
Capacities
- Capacity 4,5 litre (each)
Use : Normal
Intervals :
- Check 500 hours
- Change 2000 hours
Use : Initial service
Intervals :
The database in this YACCO web site is a guide for the correct oil for your vehicle. It is established by comparing the range of YACCO lubricants to the standards and requirements of the manufacturers.
This web site helps decision-making but does not replace the oil recommendation advice of the professional, whose liability can be engaged in case of non-respect of the oil sump capacities and of the OEM matched specification indicated in the maintenance booklet and/or in the technical documentation of the Manufacturer.
