Which lubricant for your Caterpillar 320C BDE (2002 - 2005)?

Choosing the best Yacco lubricant for the maintenance of your Caterpillar 320C BDE ? Yacco gives you a complete professional advice on selecting your motor oil, gearbox oil (transaxle), power steering and brake fluids, coolants.

Engine 3066T ATAAC

Capacities

  • Capacity 28 litre

Final drives

Capacities

  • Capacity 8 litre (each hub)

Use : Normal

Intervals :
  • Check 1 months/ 250 hours
  • Change 12 months/ 2000 hours

TRANSMI 4 SAE 30

Temperature : From -25°C to 25°C

Hydraulic system

Capacities

  • Capacity 138 litre

Use : Normal

Intervals :
  • Change 12 months/ 2000 hours

AGRIPRO HF6

Temperature : From -25°C to 40°C

TRANSMI 4 SAE 30

Temperature : From 10°C to 50°C

TRANSMI 4 SAE 10W

Temperature : From -20°C to 50°C

Use : 50% use of breaker

Intervals :
  • Change 1000 hours

AGRIPRO HF6

Temperature : From -25°C to 40°C

TRANSMI 4 SAE 30

Temperature : From 10°C to 50°C

TRANSMI 4 SAE 10W

Temperature : From -20°C to 50°C

Use : 100% use of breaker

Intervals :
  • Change 600 hours

AGRIPRO HF6

Temperature : From -25°C to 40°C

TRANSMI 4 SAE 30

Temperature : From 10°C to 50°C

TRANSMI 4 SAE 10W

Temperature : From -20°C to 50°C

Swing gear

Capacities

  • Capacity 21,6 litre

Swing reduction unit

Capacities

  • Capacity 8 litre

Use : Normal

Intervals :
  • Check 1 months/ 250 hours
  • Change 6 months/ 1000 hours

TRANSMI 4 SAE 30

Temperature : From -25°C to 25°C

Track rollers

Grease points/nipples

Cooling system

Capacities

  • Capacity 30 litre (System)
  • Capacity 1,5 litre (Reservoir)

Track idlers


The database in this YACCO web site is a guide for the correct oil for your vehicle. It is established by comparing the range of YACCO lubricants to the standards and requirements of the manufacturers. This web site helps decision-making but does not replace the oil recommendation advice of the professional, whose liability can be engaged in case of non-respect of the oil sump capacities and of the OEM matched specification indicated in the maintenance booklet and/or in the technical documentation of the Manufacturer.